where can i buy a pacman machine ★ How to Mosaic DIY Tutorials | Project Roundup | Creative Tiling Ideas â˜

by:BLEE     2019-07-12
where can i buy a pacman machine ★ How to Mosaic DIY Tutorials | Project Roundup | Creative Tiling Ideas â˜
Your new art inspiration!Mosaic is a very good process, and its effect is very long-lasting.Both indoor and outdoor.Your project may be small or you can really make your imagination crazy!On this page you will find the information you need to start making your own mosaic patterns and projects, as well as links to beginner's instructions and ideas to inspire you to try this addictive artMosaic is 4-step process;Design the mosaic pattern, glue the tiles to the base, Grout and seal, you will findby-The step tutorials listed below will guide you through each stage.Before you make a mosaic, the first thing to decide is whether the mosaic stays indoors or outdoors, as well as the size and design of the mosaic.
As a beginner, it is best to start from a small age, such as adding broken ceramic plates to the flowerpot.Once you have sorted out the basics, you can be creative about your design.-;Fragments forming the surface of the mosaic pattern.
From stained glass to shells, from pebbles to broken plates, these pieces can be made of so much material.To cut the tiles, you can use the tongs specially designed;Cut glass using glass tongs and cutters.-;the solid non-The porous surface on which it will be attached.
Outdoor items are usually made up of cement/concrete, ceramics, glass or stone. Although the interior project can have a wooden base if desired (although the porous surface should still be sealed before the mosaic is applied at the top.-;Glue that sticks tesserae to the base.-;This looks like paste, used to fill the gap between them after the tesserae is glued to the base.
You can purchase grout that is not polished or polished.The unpolished grout is finer and is only used to fill the gaps of a few millimeters, while the polished grout is used for larger gaps.Grouting appears in the form of powder (unless it is inMix), you mix it with water in order to use it.
After applying the mosaic, the excess part is removed (usually with a sponge) so that the top surface of the tesserae is fully visible.When the mud is slightly dry, you can further clean the surface with a cloth.A few days after grouting, you should add a grouting seal to protect your grouting from dirt and keep it looking good.
Have fun!1) prepare the rigid foundation for mosaic.To do this, clean the surface first.Then, if necessary, polish the material with sand to make it easier for the next layer to attach to it.For very smooth surfaces, all you need to do is do so.
If you use wood on the base (such as a medium fiber board or plywood), you should seal its surface in this preparation step.2) plan your design and draw the position of the basic outline on the base.3) use the tile cutter, clamp and other cutting tools to create the tesserae in the size you need.
Then place the tesserae/tiles in the design you want on the base so you can see how it looks and make any modifications before permanently connecting the part.4) apply adhesive.Many different adhesives can be used to glue the tile/tesserae to the base material, including pva glue, epoxy resin, tile paste and cement/mortar-Such as thin base adhesiveset.It is important to use adhesive suitable for its environment;If your mosaic is outdoors then the adhesive needs to be strong and waterproof.
Apply the adhesive with a spatula or other application tool, then place the tesserae on the top and press the adhesive down.Do it a little bit;Instead of covering the entire base with adhesive, cover a widget at a time.You don't want to use too much adhesive to fill the gap between tesserae as this will prevent grouting from filling the gap.
So please make sure to remove the excess adhesive from between the mosaics.Keep the adhesive dry.5) adding grouting.You will most likely use sandpaper grouting as this can be used for any size gap between tesserae, but if the gap is very narrow, it is possible to use unsandpaper grouting.You can buy pre-groutingMix, but most people choose to mix their own powder from the powder.
You can choose the grout color that best suits your mosaic design.Disperse the grouting on the tesserae and press it into the gap until the whole block is covered.If you use your hand in this step, it will be easier to manipulate the grouting --Remember to wear disposable gloves though.
6) clean the mosaic.
About 5-after grouting is in place-For 10 minutes (or any length of time recommended by your grouting instructions), start wiping the excess grout on the mosaic using a damp sponge until the surface of the tesserae is clean.Rinse the sponge regularly to clean the mud above.It's better to have a bucket of clear water to rinse your sponge;Mud should not be put down.
7) dry.
The grouting is fully solidified within the suggested time.You may want to spray a fine mist on the mud every 30 minutes or so to prevent it from drying too fast and possibly even cracking.8) sealing grouting.Applying a grouting capping agent can protect it from liquids, so this is a particularly important step if you want to keep the mosaic outside.
That\'s it!This chair is used as a regular metal garden chair and was built with shredded chicken and concrete before the mosaic pieces were pasted.-Please click here for the tutorial
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...